The Laserworld EL-200RGB is a RGB laser system with a total output power of up to 200mW.

The red diode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelenght of 445nm ensure beautiful colors and brightness. The beams have a diameter of about 3mm and a beam divergence of about 2mrad and the projector offers high-speed stepper motors with 2-5kpps as well as a scan angle of up to 30°. About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be adjusted.There is an on-off switch at the rear side of this device.The triple laser aperture provides extra intense red, green and blue beam effects.

The Laserworld EL-200RGB is a good solution for first-time users and mobile use and it is often used in bars, small clubs, at private parties or for home use.

With ultra bright 445nm royal blue!
Manufacturer:
Laserworld
Typical Total Power:
200mW
Guaranteed Power:
145mW
Power Red:
60mW / 650nm
Power Green:
25mW / 532nm
Power Blue:
60mW / 445nm
Laser Class:
3b
Beam Specifications:
ca. 3mm / 2mrad
Scanner:
high-speed stepper motors, up to 2-5kpps
Scan Angle:
30°
Laser Source:
Diode, DPSS Laser
Operation Modes:
Stand-Alone, Sound-to-Light, DMX
Basic Patterns:
ca. 50 (layers, tunnels, fences, waves, etc.)
Accessories:
power cable, manual, interlock, key
Power Supply:
85V - 250V AC
Power Consumption:
60 W
Dimensions:
175/395/85 mm
Product Weight:
3.9kg