tarm 5

The tarm 5 show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 5'000 mW. The benefits include:

• 5'000 mW guaranteed output power
• a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
• high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
• pure diode laser
• novel method for increasing the beam precision of the single-mode diodes
• beautiful colors and great color fading
• the tarm 5 impresses with a very bright 638 nm single mode red
• newly developed electronics with calibration capability via a browser interface
• MANUFACTURED IN GERMANY, with high precision diodes array modules

The tarm 5 has good specifications with a beam diameter of ca. 3.5 mm and a beam divergence of less than 1.0 mrad (full angle).
It is equipped with a red (1'400 mW / 638 nm), a green (1'500 mW / 520 nm), and a blue (3'000 mW / 450 nm) diode laser source.

The tarm 5 devices have very fast scanners, running at 45kpps@8° ILDA and scanning a maximum scan angle of 45° (@30 kpps), upgrades to CT-scanners with 60kpps@8° ILDA and a deflection angle of up to 60° (@35kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The tarm 5 is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to configure the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The housing of the tarm 5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 5 is suitable for demanding show laser applications and graphics projections in clubs, bars and on small stages and can be used by beginners as well as professionals.